Dynamic Towing Test Data Form
||B.L., S.C. and R.H.
|Wind Speed (MPH)
|Inspect tow equipment-bus interface
||Two tow adapters provided by TMC had to be altered to fit bus. Adapter did not fit over under part of bumper and tow eye. Approximately 3/8" of metal had to be cut from adapter.
|Inspect tow equipment-wrecker interface
||Chains were attached, as in Figure 16 of TMC procedure. Nothing unusual in connection.
||Towing was routine. A lift tow was made.
|Description and location of any structural damage
||Front axle was secured at shock absorber to maintain normal ride height. Bus was not equipped with rear towing fixtures. No rear test was performed.
Repair & Maintenance
Replacement & Repair
Back to Bus List