Dynamic Towing Test Data Form
||B.L., & N.E.
|Wind Speed (MPH)
|Inspect tow equipment-bus interface
||A safe and adequate connection was made between the tow equipment and the bus.
|Inspect tow equipment-wrecker interface
||A safe and adequate connection was made between the tow equipment (chains) and the wrecker.
||The front bumper was removed, as well as the windshield washer reservoir, in order to tow from the front axle. Two tow chains (2) were attached to the front axle, then to the wrecker. A 4" x 4" and a 6" x 8" wooden beam were used.
|Description and location of any structural damage
||Bus was not equipped with tow eyes, or hooks. Wooden beams were placed under the frame and at the front, below the spring shackle.
Repair & Maintenance
Replacement & Repair
Back to Bus List