Static Towing Test Data Form
Date:
|
1996-12-05
|
Personnel:
|
B.L., S.C., & J.P.
|
Temperature:
|
49
|
Inspect right front tow eye and adjoining structure. |
Comments:
All welds appreared OK.
|
Check the torque of all bolts attaching tow eye and surrounding structure. |
Comments:
Bumper was bent slightly upward during the 20 degree up pull.
|
Inspect left front tow eye and adjoining structure. |
Comments:
|
Check the torque of all bolts attaching tow eye and surrounding structure. |
Comments:
|
Inspect right rear tow eye and adjoining structure. |
Comments:
All welds appeared OK.
|
Check the torque of all bolts attaching tow eye and surrounding structure. |
Comments:
Bumper was bent slightly upward during the 20 degree up pull.
|
Inspect left rear tow eye and adjoining structure. |
Comments:
|
Check the torque of all bolts attaching tow eye and surrounding structure. |
Comments:
|
General comments of any other structure deformation or failure: |
Bumper was bent slightly upward during the 20 degree up pull. Note: Welds appeared to be intact. This terminated further testing. Rear towing is not recommended. |
|
|
General
Check-In
Maintainability
Repair & Maintenance
Replacement & Repair
Reliability
Safety
Performance
Structural
Fuel Economy
Noise
Glossary
Back to Bus List
|