Dynamic Towing Test Data Form
||B.L., S.C., and R.H.
|Wind Speed (MPH)
|Inspect tow equipment-bus interface
||A safe and adequate connection (clevis and chains) was made between the tow equipment and the bus.
|Inspect tow equipment-wrecker interface
||A safe and adequate connection (chains) was made between the tow equipment and the wrecker.
||Clevis hooks were attached to the tow eyes located under the front bumper. Tow chains were then attached between the clevis' and tow vehicle. A front lift tow was performed with no damage or deformation observed. No problems with the towing interface were encountered.
|Description and location of any structural damage
||The test bus is not equipped for rear towing; therefore, a rear test was not performed.
Repair & Maintenance
Replacement & Repair
Back to Bus List