||Test driver reports "crunching" noise under the bus while operating on the test track.
||Tightened the mounting bolts on the left bracket for the front stabilizer bar.
||The bolt is missing from the left side front spring, hanger to spring, on the rear axle.
||Spring realigned and bolt installed temporarily to operate bus to repair shop. Spring hanger must be replaced. Hole has elongated wear.
||Rear axle; the left front spring hanger, mounting hole is elongated.
||Both front spring hangers on the rear axle replaced.
||Front axle; 9" of lower spring leaves, both sides, have broken off.
||Manufacturer recommends sharp edges be ground off and spacer added between spring on both sides.