60 BRT

NORTH AMERICAN BUS INDUSTRIES Pdf Download PDF Report

Unscheduled Maintenance

Date Test Miles Service Activity Downtime Hours
11-05-04 2908 The A/C suction vibe-line has chaffed in the engine compartment. Thermo King moved low side refrigerant high side, replaced suction vibe-line and recharged unit. 8.0 3.5
02-11-05 14212 The right side condenser fan mounting base failed. Fan motor replaced. 8.0 1.0
10-08-04 786 the front entrance door will not open. Failed door motor replaced. 4.0 4.0
11-05-04 2908 The two rear evaporator cover latches came off. Two rear evaporator cover latches reinstalled. 8.0 2.0
11-19-05 5029 The left side spring on the rear of the transmission hanger is broken. Spring replaced. 2.0 0.5
12-09-04 6753 Rivets failed on 5 seats, 2 left side rear section and 3 left side front section Five seats repaired. 2.0 2.0
12-16-04 7590 One seat, right side, front section is broken. Seat repaired. 1.0 1.0
01-11-05 9174 The first seat behind the rear door has broken. Wall rivets replaced and seat installed. 1.0 1.0
01-11-05 9174 New door arrived. Ref. door failure on 12/15/04. New door installed. 2.0 2.0
01-14-05 9854 Both seat pedestals are broken at the articulated joint. Pedestals welded/repaired. 2.0 2.0
01-26-05 11400 The left side seats above the middle axle are loose. Seat support reinstalled into wall extrusion. 1.0 1.0
01-26-05 11400 The seats, right side behind the rear axle are loose. Seat support reinstalled into wall extrusion. 1.0 1.0
10-08-04 786 The center axle, right side brake caliber loosened and was damaged. Cengter axle, right side brake caliber replaced. 56.0 4.0
11-05-04 2908 The right side transmission torsion spring is broken. Torsion spring replaced. 8.0 0.5
11-19-04 5029 The pivot pin on the throttle pedal is broken. Throttle pedal assembly replaced. 2.0 1.0
11-19-04 5029 the lower arm bracket on the front entrance door is bent. Bent bracket replaced. 2.0 0.5
12-20-04 8077 Engine will not crank, starter failed. Installed new starter. 24.0 1.5
01-11-05 9174 Rear axle; left rear air bag is leaking at the piston. Air bag replaced. 1.0 1.0
02-08-05 13576 The rear electrical panel is loose and a wire is chaffed. Wire repaired and panel secured. 0.5 0.5
11-05-04 2908 Cummins requests a shim be installed on starter. Shim installed. 1.0 1.0
01-11-05 9174 The upper muffler/cat. converter bracket is broken. Bracket welded/repaired with 2"x3"x1/8" steel added to bracket. 1.0 1.0
01-26-05 11400 Both upper muffler mounting brackets are broken. Installed two 3 1/2" long x 1" C-channel brackets. 8.0 1.0
01-28-05 11856 The attaching bolt and hardware are missing from the muffler at the left upper bracket. Hardware replaced. 4.0 0.5
12-01-04 5091 The tube structure is cracked, rear section, left side by the circulating pump. Crack welded/repaired and gussets added at the joint on the left side structure. 184.0 16.0
01-26-05 11400 All four guidance rods on the center hoop stabilizer are loose at the bulkhead. All attaching screws tightened. 1.0 1.0
12-09-04 6753 Both front air bags failed. Both front air bags replaced. 1.0 1.0
10-05-04 434 The mounting bolts for the lower torque rods at the middle axle are loose. Bolts torqued to 190 ft./lbs. 1.0 1.0
10-22-04 1336 The upper radius rod mounting bolts at the center axle are loose. Upper radius rod mounting bolts torqued. 8.0 1.0
12-09-04 6753 The mounting bracket for the lower rear radius arm is cracked. Bracket welded/repaired. 5.0 3.0
12-16-04 7590 The rear lower, and front lower radius arm brackets are cracked. Welded/repaired both radius arm brackets. 6.0 2.0
01-04-05 8356 Manufacturer requests front air bags be replaced with new model air bag (from Taurus to Goodyear). Front air bags replaced. 3.0 1.0
01-07-05 8631 Front axle; upper bolt threads are stripped on both air bags. Manufacturer requests front air bags be replaced with original Taurus brand. Goodyear front air bags removed and Taurus brand reinstalled. 8.0 2.0
01-14-05 9854 Manufacturer requests additional reinforcement be installed to correct failures of radius arm brackets, front and rear axles. Various gussets added and 14"x20"x16 gauge steel added between the anchor points at the rear axle. 10.0 5.0
01-05-05 8435 Rear axle, left outside tire sidewall failed. Tire replaced. 8.0 1.0